Lateral Control System

At the end of the bars on which the carriage slides, there are two holders with two points that are controlled by special levers. The levers receive the commands from the reading system. Once the carriage has reached the end of the stroke, the bars (picture 44) hit the points, receive the commands and forward these commands it to the cams.

  1. Graduated plate for reading the position of lowering cams
  2. Pointer that reads the position of the lowering cams
  3. Control head for the raising cam and the rear transfer cam
  4. Control head for the raising cam and the rear receiving cam
  5. Control head for the rear looping cam
  6. Control head for changing the position of rear lowering cams
  7. Reset rod of the lowering cams
  8. Control head for changing the position of front lowering cams
  9. Control head for the front looping cam
  10. Control head for the front looping cam and the low needle transfer selection cam M) Control head for the front raising cam and the front receiving cam N) Control head for the front raising cam and the front transfer cam O) Carriage slide

Picture 44 - Carriage with command levers

0 0

Post a comment