Stitch cam settings

The stitch cams are located in slots by studs and they may be raised or lowered to a different setting position by moving the stud along the slot (Fig. 18.3). Unless the rate of yarn feed is controlled, the setting of the stitch cam at knock-over will determine the stitch length because it controls the distance the head of the needle descends below the knock-over bit edge from the rest position. The alternating stitch cam settings are indicated by pointers on a calibrated scale on the outside of the cam-plate.

On hand flats, the adjustment of the settings is obtained by hand controls, whilst on modern electronically-controlled flats, each stitch cam is raised and lowered by its own step motor, so a wide range of stitch lengths can be achieved during the knitting of a garment.

Staying Relaxed

Staying Relaxed

Start unlocking your hidden power with self hypnosis by relaxing and staying relaxed. This is just the audio you have been looking for to do just this.

Get My Free MP3 Audio


Post a comment